Background

    The Kirkpatrick name in support of our customer’s worldwide
    maintenance requirements extends back to1967. This experience
    was first established in support of our own 400 Crane Rental Fleet
    and later with the wire rope lubrication systems developed to
    maintain those cranes load lines, pendants, and boom hoist cables.
    The Kirkpatrick Group, Inc. has been the manufacturer of
    wire rope lubrication equipment for almost three decades. We
    developed the first successful wire rope lubrication system in the
    world for our own use in 1982...learn more

Wire Rope Lubrication Systems

    Kirkpatrick Wire Rope Lubrication Systems are excellent for
    Wire Rope & Cable Lubrication/Cleaning. In only one
    application wire rope can have its surface and groove
    pattern scraped clean of product build-up and grit
    while at the same time new lubricant is uniformly applied
    to the newly cleaned surface. Coating product then fills
    any open specs within the groove pattern and internal
    strands open to receive it. This is accomplished as the
    wire rope passes through...learn more

Wire Rope Lubricant

    Dynagard Blue is an extreme pressure unleaded environmental
    wire rope lubricant blended for excellent resistance to
    softening undersevere working conditions, water resistance,
    and it’s compatibility with all Kirkpatrick Wire Rope Lubrication
    Systems in addition to manual hand application. Its
    slickness and viscosity allow it to stay alive with the wire as the
    strands move during load bearing operations. This attribute also
    allows it to continuously redistribute itself to cover any internal
    strand areas that may have been missed during the initial lubrication
    process...learn more

Wire Rope Dressing

    Dynagard LVL is a highly tenacious adhesive wire rope dressing
    formulated for use in both Marine and Mining applications
    where a quickly penetrating product is required with the low
    fling off adhesive attributes of a much higher viscosity coating.
    This is especially important at high wire rope travel speeds
    where fling-off is more apt to occur after the initial
    application of product. Dynagard LVL penetrates the outer
    strands of wire rope and cable and is excellent in displacing
    moisture when used with the Kirkpatrick JUL Internal Spray Systems.
    This product ...learn more