Why Pressure Lubricate?
Wire Rope goes through a controlled 100% pressurized immersion at up to 100' per minute*
Outer surface and groove pattern wiped clean of water and contaminants allowing optimal penetration/coating
Labor costs reduced. Safety increased
Less Lubricant waste
Increased wire rope life
Why Kirkpatrick?
Experience: Over 29 years in wire rope pressure lubrication as well as supporting our customers since 1967 for their maintenance requirements
worldwide. We can troubleshoot our customer's applications because of this long term direct onsite field experience.
Our system design has evolved to incorporate design features to accommodate the broadest possible field application range in the world.
Proven operational performance.
Timely parts and system availability assured for our customers. We stock.
4 major successful independent U.S. Government evaluations from 1986 to 2002 proving system performance and reliability.
Approved By: United States Coast Guard, U.S. Navy, U.S. Army, U.S. Army Corps of Engineers, NATO,
Canadian Coast Guard, Canadian Navy, Australian Navy
Dynagard Blue and Dynagard "E" approved: Type I and Type II Quality Products List (NATO & U.S. Military)
Testimonials:
Naval Air Systems Command / Chief of Naval Operations Preproduction Evaluation 2002
The wire rope lubrication system evaluated during the project appears to have significant potential for reducing material usage and waste
disposal costs. Significant labor savings are possible due to the reduced labor required to perform cable cleaning and lubricating events.
Of equal importance, the wire rope lubrication system is a safer alternative than the previous method used because it does not require
personnel to place grease on their gloves and wipe the crane cable. The cost analysis showed a 10-year ROI of approximately $ 135,900.60
and a breakeven point of .41 years.
P2 AFLOAT Award Submittal, Commander, Naval Base Norfolk, Secretary of the Navy 1998
The old cable cleaning method employed solvents and hand scraping, with a wire brush to remove the old grease.
Afterwards the new
grease was applied by hand. This process was time consuming and dangerous. A wire rope lubrication system is now used that automatically
removes the old grease and re-applies new grease simultaneously. This process has reduced work time from 6 man-hours to 30 minutes
for 450' of cable, saving a total of 1,080 Hours annually at a savings of nearly $43,000.
Ex.: Kirkpatrick Cable Lubricator, USS Arctic: 10-year cost savings:
$652,000, Labor reduction: 75%, Breakeven Point: .1 year.
Chief of Naval Operations Pilot Ergonomics Program Evaluation 2000:
The manual process required 6 workers and 2 full days to complete the cleaning and lubrication
of a set of crane cables. Utilizing the wire
rope lubrication system the process required 3 workers
for 4 hours. Annual Cost Savings: $366,356.48 Breakeven Point: 10.5 Days.
United States Coast Guard Naval Engineering Manual Chapter 613:
Diligent use of pressure wire rope lubrication systems can increase the service life of wire rope.
Wire Rope pressure lubrication systems
with a proven history of performance in Coast Guard applications include systems manufactured by The Kirkpatrick Group, Inc.,
Dallas, TX.
All new United States Coast Guard Buoy and Construction Tenders have a Kirkpatrick Model SU35B as part of their
standard equipment when they leave the ship yard.